Douglas C-47 Skytrain (1:1) for Stormworks: Build and Rescue
Here you can download Douglas C-47 Skytrain (1:1) mod for Stormworks: Build and Rescue. Its full description is below. Visit our blog to find out how to install the mod.
The content of the mod has been downloaded and repackaged without any changes from the original source. We are not responsible for technical problems of the game or mod, but we guarantee the absence of malicious code
Size (unpacked): 3.445 MB
Updated: 9 May, 2020 @ 6:31am
The Douglas C-47 Skytrain or Dakota (RAF, RAAF and RNZAF designation) is a military transport aircraft developed from the civilian Douglas DC-3 airliner. It was used extensively by the Allies during World War II and remained in front-line service with various military operators for many years.
This is my 1:1 scale Stormworks rendition of the Douglas C-47 Skytrain. I put lot of effort into making the exterior of it look as authentic as possible to the real life counterpart, and I'm very happy with how it turned out. My goal was making it look as realistic as possible, while still having a lot of playability. It's cockpit is built using photos of the real C-47 cockpit, and is about 75% authentic in terms of looks and gauge placement. I managed to fit in most of the buttons that are present on the real life counterpart's overhead panel, but due to Stormworks restrictions I couldn't replicate the overhead panel placement. Since my goal was keeping it simple and easy to use, I've simplified It's control and flight systems. I've also added some touches of my own to It's interior.
I sincerely hope you enjoy playing with this aircraft as much as I enjoyed building it.
- Crew: 3 (Pilot, co-pilot, radio operator)
- Capacitity: 22 troops
- Maximum speed: 131 knots
- Range: about 180km at top speed
- Total fuel tank capacity: 7120L
- Powerplant: 2 medium engines
- Active stabilization system
- Rear cargo doors
- Small side door
- Toe brakes
- Fuel mixture control lever
- Radio station
- Emergency exits
- Interior lights and heating
- Realistic exterior lights
- Parachute troop signal lightStartup Procedure
1. Enter the cockpit, either through the rear doors or the front door located on the left side of the fuselage (next to the left engine.)
2. Flip the master battery switch.
3. Toggle the cockpit backlights and cockpit lights if needed.
4. Toggle both boost pumps and move the mixture lever to at least 0.25.
5. Move the engine power lever to at least 0.15.
6. Toggle the propeller feathering control buttons: they lower propeller collective to ensure that the aircraft won't start moving.
7. Toggle both ignition switches and leave them on. After that, toggle the starter switches. Disengage the starter switches once the engines are running.
8. Toggle the recognition lights and the tail light. If needed, toggle the runway lights and landing lights.
9. Disengage the parking brake and prop feathering control buttons and throttle up.Final note
Note that due to the high amount of paint blocks and detail, this aircraft may cause lag on some lower end systems and might not be suitable for large multiplayer servers.
If you find bugs or have any questions about the aircraft, feel free to DM me on Discord (ArcticShark#9752)
Please respect the time and effort I put into this vehicle by not reuploading it. This also goes about custom/modified versions.